Products to Compare (max of 3)
X
Compare These Parts

Axle Flange Identification

7/21/2016
Add Article To List

Identifying Your Rear Axle Flange

Ford, Chevrolet, Oldsmobile, Pontiac, they all used a different axle flange at one point or another. Being able to identify the flange you have can spare you a lot of grief when it comes time to buy parts, not to mention speeding up the process as a whole. Check out the graphic below to help you identify some of the more common axle flanges you will encounter!

Products Featured in this Article

Related Articles

 Choosing Parts for Your Ford 9" Third Member Build
by Speedway Tech Team - Posted in Tech
6/11/2018
Lucas P. explains how to choose the correct part for a Ford 9" third member build in order to achieve a bulletproof rear. You will find specific recommended parts to use from Speedway Motors.
GM 10-Bolt Polished Finned Aluminum Rear End Cover Installation Guide
by Steve Lewis - Posted in Tech
12/19/2017
Steve provides a step-by-step guide to install the Speedway Motors GM 10-Bolt Polished Finned Aluminum Rear End Cover.
Speedway Tech Talk - Ford Banjo Rear End Open Drive Conversion Kit
by Tim Matthews - Posted in Videos
6/28/2016
Tim talks about our Ford banjo rear end open drive conversion kit.
Model A I Beam Front Axle Install
by Speedway Tech Team - Posted in Tech
3/6/2018
Our hot rod expert takes you through his ford I beam axle setup. Follow as he sets up the front end on his split wishbone front suspension Model A.
Suspension Front Solid Axle Design
by Jason Lubken - Posted in Tech
9/15/2016
We will show you the differences among traditional I-beam and tube axles and suspension designs used on hot rods; the differences between cross and traditional steering, measuring for springs, what spindles to choose, and much more.
8 Inch to 9 Inch Upgrade
by John Wulbern - Posted in Tech
9/15/2016
In this Tech Tip, John responds to a customer looking to upgrade the 8” stock differential in his Cougar to a 9” open diff.
Speedway Tech Talk - Early Ford Hubs & Bearing Components
by Tim Matthews - Posted in Videos
8/9/2016
Tim talks about soem of the early Ford hubs & bearing components we offer.
Adapting Tremec's Popular T5 5-speed Manual to Ford's Flathead V8 Engine
by Jason Lubken - Posted in Tech
9/22/2022
We can teach you some of the major differences between the Ford and GM-style T5 Flathead transmission adapter kits. We'll also walk you through choosing the correct parts in order to make this installation a breeze!
Ford And Chevy Spindle Options For Solid Axle Hot Rods
by Speedway Tech Team - Posted in Tech
4/4/2022
Dive into some of the history and unique differences between Ford and Chevy spindles for solid front axles and what will perform best on your hot rod.
How to Choose a Torque Converter
by Jason Lubken - Posted in Tech
6/11/2021
Learn how to select a torque converter. Read up on expert torque converter recommendations and learn how to choose the right stall speed for your torque converter and application.